西门子威迪欧汽车电子（芜湖）有限公司
001. Software Engineer 软件工程师 （3人）
Department: IIP 乘用车仪表事业部
Location: Wuhu
Responsibility
- • Software application development
- • Support to customer
- • Support to equipment
- • Others daily work
Education & Preferred Majors
- • Bachelor Degree
- • Related Software
Technology & Skills
- • Software knowledge
- • Good oral and written English
- • Good communicate
002. Business Finance Controller 财务控制专员 （1人）
Department: IIP 乘用车仪表事业部
Location: Wuhu
Responsibility
- • Project control
- • Actual reporting tracking and analysis
- • Procedure implement
- • IP division balance score card report and analysis
- • Other relevant work
Education & Preferred Majors
- • Bachelor Degree
- • Account management
Technology & Skills
- • Good organization, coordination and communication
- • Perfect spirit of group cooperation
- • Good oral and written English
003. Quality System Engineer 质量体系工程师 （2人）
Department: Quality 质量部
Location: Wuhu
Responsibility
- • Participate system related procedures prepare, update
- • Be responsible for the complain with the government rules, including environment protection and occupational regulations
- • Audit related issues prepare and coordination and action plans following
Education & Preferred Majors
- • Bachelor Degree
- • Electronics, Mechanical and Industrial engineering
Technology & Skills
- • Better English skills in oral and writing
- • Quality sense and could be worked well in terms of team activity
004. Product Engineer 产品工程师（5人）
Department: Quality 质量部
Location: Wuhu
Responsibility
- • Familiar with engine actuator
- • Communicate with customer for new product application
- • Communicate with DA R&D center for new product development
- • Support quality engineer to analyze the return parts
Education & Preferred Majors
- • Bachelor Degree
- • Electronic or Mechanical
Technology & Skills
- • Technologies Mechanical Design knowledge
- • Perfect spirit of group cooperation
- • Good oral and written English
005. Project Engineer 项目工程师 （2人）
Department: AM进气系统部
Location: Wuhu
Responsibility
- • To coordinate the work of the project team, achieving the goals set for project
- • Lead project team to achieve the objective of quality, cost and progress
- • Adjust planning and define the resource demand according to project requirements
- • Find out customer's demand, take charge in obtaining customer's project requirement, and put forward the relevant requirement to the project team
Education & Preferred Majors
- • Bachelor Degree
- • Electronic or Mechanical
Technology & Skills
- • Mechanical Electronic knowledge
- • Perfect spirit of group cooperation
- • Good oral and written English
006. Business Development Engineer 业务发展工程师 （3人）
Department: BD 商务部
Location: Wuhu
Responsibility
- • Developing relationship with OEMs
- • Preparing the proposal on OEM's RFQ
- • Work with team to satisfy our customers
- • To reach the sales target which set by SV
Education & Preferred Majors
- • Bachelor Degree
- • Automotive or Mechanical
Technology & Skills
- • English excellent
- • English excellent and Korean well(1 person)
- • Self-motivated
- • Willing to travel
- • Excellent communication
- • Computer professional
- • Team work
007. Finance Account 财务专员 （4人）
Department: F&A 财务部
Location: Wuhu
Responsibility
- • Costing accounting
- • Finance analysis and control
- • Other relevant work
Education & Preferred Majors
- • Bachelor Degree
- • Account management
Technology & Skills
- • Good organization, coordination and communication
- • Perfect spirit of group cooperation
- • Good oral and written English
西门子威迪欧汽车电子（长春）有限公司
101. Software Engineer 软件工程师（2人）
Department: CSC安全及底盘电子部
Location: Chang Chun
Responsibility
- • Implement Software according to design and architectural rules
- • Adhere to development rules according to guidelines, methods and processes
- • Prepare documents for Software integration , Consider non-functional requirements
- • Measure usage of controller resources (runtime, RAM, ROM) for SW packages
- • Set CR status to internal released (implement and verify change)
- • Software development process improvement, Perform effort estimation
Education & Preferred Majors
- • Master degree
- • Electronics Science & Technology Major
Technology & Skills
- • Good oral and written English
- • Knowledge of guidelines, methods and processes, coding rules, SW architecture rules
- • Knowledge of programming language to be used, SW design
- • Knowledge of development tools, controller features
- • Knowledge about HW interfaces
102. Algorithm Engineer算法工程师（4人）
Department: CSC安全及底盘电子部
Location: Chang Chun
Responsibility
- • Calibration of algorithm for airbag control unit
- • Discussion of calibration results (Airbag Firing Times) with customers leading to a customer release
- • Release of calibration parameters for series production，Crash simulation with simulation tool
- • Generating of overall know how regarding vehicle safety and restraint systems
- • Coordination and tracking of test programs, data exchange, data quality, test documentation, etc.
- • Establishing standards with customers in terms of test programs (vehicle status, number of crashes and misuse tests, verification procedure, test set up, sensor ranges, reproducibility of tests, development timing, etc.)
Education & Preferred Majors
- • Master degree
- • Electronics Science & Technology Major
Technology & Skills
- • Good oral and written English
- • Digital Signal Processing，SW, programming, Physics
- • SV processes for application
- • Vehicle structure, crash testing
- • R&D in Automotive industry
- • MS office tools
103. Line Quality Assurance Engineer 客户质量保证工程师（6人）
Department: CSC安全及底盘电子部
Location: Chang Chun
Responsibility
- • Line quality monitoring, system following, problem solving
- • Optimizing manufacturing process to meet the quality and economy target , apply Siemens VDO production System (SVPS)
- • Controlling budget, reducing costs, personal evaluation and implementing top+ WIP , 3i activities
- • Co-operating with business development related activities
Education & Preferred Majors
- • Bachelor degree
- • Electronics Science & Technology Major
Technology & Skills
- • Good oral and written English
- • Quality system in automotive parts manufacturing area ，Manufacturing and testing equipment
- • Quality tools - PFMEA, DOE, MCA, PPCA, 8D, POKE YOKE
- • Industry Engineering (lean production, 5S, 7 kinds of waste)，Electronics manufacturing method and technology
- • Financial knowledge, Logistic concept，Environment protection, Healthy, Safety of production
- • IT tools relevant for the tasks
104. Embedded SW Engineer嵌入式软件 开发工程师 （8人）
Department: PED电子驱动部
Location: Chang Chun
Responsibility
- • Implement Software according to design ，Consider non-functional requirements
- • Prepare documents for Software integration ， Measure usage of controller resources (runtime, RAM, ROM) for SW packages
- • Set CR status to internal released (implement and verify change)，Perform effort estimation
- • Implement Software according to architectural rules，Software development process improvement
- • Adhere to development rules according to guidelines, methods and processes
Education & Preferred Majors
- • Master Degree
- • Electronics Science &Technology Major
Technology & Skills
- • Good oral and written English
- • engine, or auto-transmision knowledge
- • Knowledge of guidelines, methods and processes, coding rules, SW architecture rules
- • Knowledge of programming language to be used, SW design
- • Knowledge of development tools, controller features
- • Knowledge about HW interfaces
105. Industry Engineer工业工程师 （1人）
Department: PED电子驱动部
Location: Chang Chun
Responsibility
- • Continuous increase of productivity(measuring, monitoring, reporting)Support to implement SVPS
- • Standard form and management tools introduction, Standardization of line architecture (coordination on plant level) , supporting tools and helping material
- • Production Line Layout review with MP, Work Station Design (ergonomics review) with EPM Supporting for product launching (coordination on plant level)
- • Production Package Design(Concept) with Logistic and PM
- • Area definition with plant management, Material throughway and production address system
Education & Preferred Majors
- • Bachelor Degree
- • Industry Engineering Major
Technology & Skills
- • Good oral and written English
- • Mechanical Engineering and packaging
- • Economics, SVPS and lean production
- • 6σ and others analysis tools
- • Basic knowledge of Logistic and Finance
- • AutoCAD / Pro-E
106. Manufacturing Planner 生产规划工程师 （8人）
Department: PED电子驱动部
Location: Chang Chun
Responsibility
- • Development of the production concept including technologies, process
- • Definition of manufacturing equipment ( requirement, specification)
- • P-FMEA and special process characteristics
- • Process capability analysis
- • Comparison of production results to targets
- • Packaging specification，DFM (Design for manufacturing & Design for test)，Definition of manufacturing data collection system
Education & Preferred Majors
- • Bachelor Degree
- • Mechanical/electronics Engineering Major
Technology & Skills
- • Good oral and written English
- • Manufacturing process design, Machine function analysis, Manufacturing machine design and maintenance knowledge
- • Knowledge of business or commercial sense
- • Mechanical manufacturing method and technology
- • Equipment/Process
107. Application Engineer匹配工程师 （3人）
Department: PGS System喷油器部
Location: Chang Chun
Responsibility
- • Understand and update the know-how on engine management system and its components
- • Perform engine and vehicle calibration according to methodologies，Coach new employee
- • Operating dynamometer and chassis dynamometer and participate test trips
- • Operation ,maintenance of available measuring devices，Occasional task or function
- • Woke out technical documents, such as software specifications at mainly minor level updates, test reports, analysis and assessment of tested results and improvement suggestions, as well as necessary design drawing for test apparatus.
- • Engine management system after-sales service，Engineering interface between SV P GS and China customers
Education & Preferred Majors
- • Bachelor Degree
- • Internal Combustion Engine Major
Technology & Skills
- • Good oral and written English
- • Internal combustion engine principle ,automobile theory, measurement technology
- • EMS system and its components, Awareness of quality control methods, Engine and vehicle design
- • Drive and maintain vehicle, Test bench operation and maintenance, CDA/Pro-E/UG knowledge
- • Good relationship with customer, An effective communicator in English in written and verbal form
- • Computer(MS Office)
108. Manufacturing Engineer-Injector维修工程师-注射器 （1人）
Department: PGS C 喷油器部
Location: Chang Chun
Responsibility
- • Process design, development and improvement to provide clean injector manufacturing process, including:
- 1) washer process improvement
- 2) measurement system analysis
- 3) planned contact
- 4) un-planned contact
- 5) 5S
- • All the tasks of ME for his delegated programs
Education & Preferred Majors
- • Bachelor Degree
- • Mechanical Engineering / Automation Major
Technology & Skills
- • Good oral and written English
- • Mechanical/ Electro-Mechanic/ Pneumatic drive/ Automation knowledge; SPC, FMEA, MSA
- • Supplier process know how (Welding/Furnace brazing; resistant/Arc-welding, etc), product Know how, process know how (Leak testing, Laser welding, etc)
- • MS office, SAP, MS Project, Mini-tab, IQ-RM, Others applicable items for ME
- • Communication skill, Project Management, Process Management, Innovation Methods, Knowledge sharing
- • Legal issues: Automotive legislation, Quality Management/ISO16949, VDA6.1,6.3, 6.5, Lean Manufacturing
109. Manufacturing Engineer-Injector-Laser维修工程师-注射器-激光 （1人）
Department: PGS C 喷油器部
Location: Chang Chun
Responsibility
- • Process design, development and improvement to provide clean injector manufacturing process, including:
- 1) washer process improvement
- 2) measurement system analysis
- 3) planned contact
- 4) un-planned contact
- 5) 5S
- • All the tasks of ME for his delegated programs
Education & Preferred Majors
- • Bachelor Degree
- • Mechanical Engineering / Automation Major
Technology & Skills
- • Good oral and written English
- • Mechanical/ Electro-Mechanic/ Pneumatic drive/ Automation knowledge; SPC, FMEA, MSA
- • Supplier process know how (Welding/Furnace brazing; resistant/Arc-welding, etc), product Know how, process know how (Leak testing, Laser welding, etc)
- • MS office, SAP, MS Project, Mini-tab, IQ-RM, Others applicable items for ME
- • Communication skill, Project Management, Process Management, Innovation Methods, Knowledge sharing
- • Legal issues: Automotive legislation, Quality Management/ISO16949, VDA6.1,6.3, 6.5, Lean Manufacturing
110. Manufacturing Engineer-Lean Manufacturing维修工程师-倾斜维修 （1人）
Department: PGS C 喷油器部
Location: Chang Chun
Responsibility
- • Drive the Lean Manufacturing Implementation in GS C
- • Support the PT, PE, MP, ME to develop the Lean process
- • Searching and eliminate the waste in manufacturing and administration process
- • Coaching the team for lean tools
Education & Preferred Majors
- • Bachelor Degree
- • Mechanical Engineering / Automation Major
Technology & Skills
- • Lean Manufacturing Tools (VSM, cell design, poke yoke, balance production, Jiduka, 5S, etc)
- • Hydraulic knowledge，SPC, FMEA, APQP, PPAP, MSA 5 tools.
- • Supplier process know how (Welding/Furnace brazing; resistant/Arc-welding, etc)
- • product Know how，process know how (Leak testing, Laser welding, etc)，Test Methords & tools (DV, PV)，MS office, SAP, MS Project，Mini-tab, IQ-RM
- • Communication skill, Project Management, Process Management, Innovation Methods, Knowledge sharing
- • Legal issues: Automotive legislation, Quality Management/ISO16949, VDA6.1,6.3, 6.5, Customer Quality Process/ Formel-Q, Ford Q1, GM AP
111. Manufacturing Planner-Injector生产规划工程师-注射器 （1人）
Department: PGS C 喷油器部
Location: Chang Chun
Responsibility
- • Development of the production concept including technologies, process
- • Definition of manufacturing equipment ( requirement, specification)
- • P-FMEA and special process characteristics
- • Process capability analysis
- • Comparison of production results to targets
- • Packaging specification，DFM (Design for manufacturing & Design for test)，Definition of manufacturing data collection system
Education & Preferred Majors
- • Bachelor Degree
- • Mechanical/electronics Engineering Major
Technology & Skills
- • Good oral and written English
- • Manufacturing process design, Machine function analysis, Manufacturing machine design and maintenance knowledge
- • Knowledge of business or commercial sense
- • Mechanical manufacturing method and technology
- • Equipment/Process
112. Application Engineer-injector匹配工程师-注射器 （1人）
Department: PGS C 喷油器部
Location: Chang Chun
Responsibility
- • Drive technical development of applications for customer programs, Formulates definition of products and samples to meet customer needs, including handling of samples and coordination of DV testing, in close cooperation with production facility.
- • Prepare and release product engineering drawing
- • Collect, structure, document and communicate information and requests between customer / Resident Engineer and GS C in both directions and between different departments (e.g., specifications, drawings, DV test documents)
- • Develop with RE a technical negotiation with Customer in order to balance internal workload + feedback LT vs. Customer Satisfaction
- • In cooperation with segment PQE maintain and share with RE & BD updated "open point" overview and track the status of what has been committed to customer (timing, samples definition, technical request, validation status,..)
- • Active participation in troubleshooting in cooperation with PE, PQE, and ME, Technical coach and support to Lab assistant engineer in Durability and Performance Lab
Education & Preferred Majors
- • Bachelor Degree
- • Internal Combustion Engine Major
Technology & Skills
- • Good oral and written English
- • Mechanical/ Electro-Mechanic knowledge; Supplier process knowledge (Laser welding, etc), CAD software ability, Hydraulic knowledge, Documentation description/control,, Microsoft office, MS Project
- • Test Methods & tools (DV, PV), Product and Sales Strategy, Gasoline Engine Fuel injection Knowledge, GS C product Know how, Injector Design Guideline/ Know how, Vehicle technologies
- • GS C process know how (Leak testing, Laser welding, etc), GS C test know how (How to performed)
- • Legal issues: Automotive legislation, Intercultural Skill/Knowledge, Customer Voice Table, Requirements Specification Review Method, Network to OEM
- • Improvement Methods ,knowledge sharing, Quality Management: DOE, PPAP, APQP, FMEA, SPC, Project Management
113. Designer-Fuel Rail Assembly设计者-燃油导轨集合 （1人）
Department: PGS C 喷油器部
Location: Chang Chun
Responsibility
- • Formulate design concepts & development of production drawings.
- • Ensure drawing/model details meet internal and customer requirements.
- • Ensure design tolerances/stack-ups meet manufacturing capabilities & product performance requirements.
- • Work with component suppliers in the development of optimized (cost, performance) designs.
Education & Preferred Majors
- • Bachelor Degree
- • Mechanical Engineering / Automation Major
Technology & Skills
- • Good oral and written English
- • Mechanical knowledge; Material (especially in Metal, Fuel hose)，CAD software ability (Proe, UG, Catia)，Geometric Dimension &Tolerance using; Documentation description/control
- • Microsoft office, MS Project；GS C component knowledge: Injector, Regulator, Damper; Fuel Rail Design Guideline；Vehicle technologies；Modeling method (Simulation/Prototyping)
- • Legal issues: Automotive legislation；Intercultural Skill/Knowledge；Customer Voice Table
- • Improvement Methods；Knowledge sharing；SPC
114. Designer-CAE-Fuel Rail Assembly设计者-CAE-油导轨集合 （1人）
Department: PGS C 喷油器部
Location: Chang Chun
Responsibility
- • Formulate design concepts & development of production drawings.
- • Ensure drawing/model details meet internal and customer requirements.
- • Ensure design tolerances/stack-ups meet manufacturing capabilities & product performance requirements.
- • Work with component suppliers in the development of optimized (cost, performance) designs.
Education & Preferred Majors
- • Bachelor Degree
- • Mechanical Engineering / Automation Major
Technology & Skills
- • Good oral and written English
- • Mechanical knowledge; Material (especially in Metal, Fuel hose)，CAD software ability (Proe, UG, Catia)，Geometric Dimension &Tolerance using; Documentation description/control
- • Microsoft office, MS Project；GS C component knowledge: Injector, Regulator, Damper; Fuel Rail Design Guideline；Vehicle technologies；Modeling method (Simulation/Prototyping)
- • Legal issues: Automotive legislation；Intercultural Skill/Knowledge；Customer Voice Table
- • Improvement Methods；Knowledge sharing；SPC
115. Lab Assistant Engineer-Injector实验室助理工程师-注射器 （1人）
Department: PGS C 喷油器部
Location: Chang Chun
Responsibility
- • Prepare samples & set up equipment with associated fix Turing to run any or all of the above types of tests.
- • Perform routine maintenance on all of the test instrument and test equipment.
- • Write test procedures & reports, to document final test results.
- • Enter customer data info into the lab database for tracking progress on any given return authorization (RA) analysis.
- • Perform calibration of various test instruments
- • Maintain calibration scheduling and record-keeping that complies with all QS-9000 and ISO requirements, and other governing standards of operation and performance.
Education & Preferred Majors
- • Bachelor Degree
- • Mechanical Engineering / Automation Major
Technology & Skills
- • Good oral and written English
- • Mechanical/ Electro-Mechanic knowledge; Hydraulic knowledge; Documentation description/control
- • Microsoft office; Test Methods & tools (DV, PV, Measurement, How to performed); product Know how; process know how (Leak testing, Laser welding, etc)
- • Legal issues: Automotive legislation; Intercultural Skill/Knowledge
- • Improvement Methods;Knowledge sharing;Quality Management: FMEA, SPC
116. Project Quality Engineer (FRA) 项目质量工程师 （1人）
Department: PGS C 喷油器部
Location: Chang Chun
Responsibility
- • Responsible to arrange that all quality related and safety relevant aspects during the development & launch process are covered (internal, supplier and customer) as described in the corresponding development procedure, in cooperation with the PL.
- • Development and maintenance of the Quality Plan; Pursuing that lessons learned are used and collected; comparison of quality results to targets (functionality, time schedule); Participation in all Milestone Reviews and PACT workshops.
- • Controlling of project specific quality actions according Quality Plan, and the identification and tracking of quality related findings, before they affect the external customer. (E.g. consideration of supplier quality aspects (Product Readiness Meetings), quality resource planning, change management, PPAP, quality data registration techniques, process capability analysis, re-qualifications, etc.).
- • Pursuing (i.e. tracking, requesting, supporting, provision of methodologies), that the required methods in a project are implemented according to project plan / Quality Plan (this includes e.g., Quality Gates, status meetings, APQP, launch readiness review, knowledge management).
- • Provision of all quality related costs for the calculation and budgetary purposes; Continuous quality reporting which must contain the implementation status of measures and results according Quality Plan, and status of correction measures in case of deviations to meet planned targets.
- • Supporting the release of prototypes, tooling, equipment (gages, fixtures), ISIR customer approval (e.g. process capability studies) by supervising, that the requirements fixed in the Quality Plan are fulfilled; Supporting of quality, production and service employee training in cooperation with the manufacturing planner / engineer.
Education & Preferred Majors
- • Bachelor Degree
- • Mechanical Engineering / Automation Major
Technology & Skills
- • Good oral and written English
- • Basic product specifics, Manufacturing technologies, Test strategies, Component knowledge
- • Basics in project management; Acquisition and quote process; Development process (e.g. SCDLP); Establishment of Quality Plan; Change/ configuration management; Local quality management/ quality system basics; Basic contract management (e.g. ATT); Risk Management; Value Analysis / Value Engineering / Lean Manufacturing
- • Quality Function Development (QFD); Control Plan; Design Verification, Design Validation, PPAP, Product Sample Warrants (PSW); APQP as applicable ; Review procedure; Audit (project, process); Measurement Systems Analysis (MSA); Statistical Process Control (SPC), process capability; Technical statistics (data analysis, ANOVA, etc.); Design of Experiments (DoE); Reliability, Weibull analysis; Poke Yoke / mistake proofing; Geometric Dimensioning and Statistical Tolerancing (basics); 8D / Problem solving techniques (e.g. Kepner Tregoe)
- • Standards / laws (customer, etc.); Major customer relevant languages, if applicable
117. Project Leader项目主管 （1人）
Department: PGS C 喷油器部
Location: Chang Chun
Responsibility
- • Drives and leads the project management activities according to the PM processes and related methods to achieve the project objectives as defined in the Project Agreement.
- • Representation of project towards the customer including status presentation and negotiation on changes, requirements and proceeding with customer.
Education & Preferred Majors
- • Bachelor Degree
- • Mechanical Engineering / Automation Major
Technology & Skills
- • Good oral and written English
- • FC Product knowledge；FC Process knowledge； Supplier Process knowledge；Documentation description/control；Microsoft office, MS Project；Test Methods & tools (DV, PV)；Product and Sales Strategy；Gasoline Engine & fuel injection Knowledge；Vehicle technologies
- • Legal issues: Automotive legislation；Negotiation competency；Intercultural Skill/Knowledge；Customer Voice Table；Requirements Specification Review Method
- • Network to OEM；Legal issues: Contract right；Knowledge about Business Process；R&D controlling；Cost center controlling；Marketing
- • Improvement Methods; Innovation Methods; Knowledge sharing; Quality Management: PPAP, APQP, FMEA, 8D/5why/5steps
118. Mechanical Designer机械工程师 （10人）
Department: PSN 传感器部
Location: Chang Chun
Responsibility
- • Create and verify hardware specification (e.g. BOM,Drawing, specification) according to Project equipment
- • Leading D-FMEA and Design Freeze in Product development
- • Design verification and validation in Product development to get a confidence design
- • Project documentations to record activities for future (e.g. Audit, lesson learn etc), Participate components review and components approval in Product development
- • Leading A,B sample building and verification, Technical support of Running Production
- • Join MCP in order to gain cost saving
Education & Preferred Majors
- • Master degree
- • Mechanical Engineering / Automation Major
Technology & Skills
- • Good oral and written English
- • Mechanical Principle, Material property
- • Project development procedure-P730001
- • Auto CAD / Pro-E / Catia software operation
- • Design FMEA
- • Computer (MS office)
119. Test engineer测试工程师 （15人）
Department: TE 测试部
Location: Chang Chun
Responsibility
- • Introducing and developing test adapting process/technology to meet requirement of SVCC development; optimizing current test adapting process to meet the quality and financial target.
- • Implementing ECR in test adapting process to meet production process improvement and quality target; Keep test adapting equipments stable by support pre-maintenance and troubleshooting.
- • Increasing productivity continuously; Test environment creation and improvement, test equipment troubleshooting.
- • Carrying out top+ wip items, 3i items, Implementing 5s and SVPS, TPM.
- • Coach new engineers to increase technology and capabilities to meet equipment of SVCC. And train operators to implement WI.
- • Production equipment creation for new projects and new equipment acceptance.
Education & Preferred Majors
- • Master degree
- • Electronics Science &Technology Major
Technology & Skills
- • Good oral and written English
- • Knowledge of business; Manufacturing method and technology
- • Quality system in automotive parts manufacturing area; Test equipment.
- • Product Liability, Quality tools - PFMEA, DOE, MCA, pPCA, 8D, POKE YOKE
- • Intercultural knowledge; Project management; Moderation and presentation
120. Electronics Hardware 电子硬件 （8人）
Department: PED电子驱动部
Location: Chang Chun
Responsibility
- • Maintenance, enhancement, testing and support of existing electrical hardware, Design, develop, and implement electrical hardware solutions while adhering to manufacturing capabilities.
- • Directs the testing, root cause analysis and modification of electrical hardware, Participates in the development of estimates for task duration, supporting the process for developing and maintaining schedules, cost and quality in projects with a moderate level of complexity.
- • Is involved in the quality process by the rigorous and detailed execution of module, sub-system and system test procedures.
- • Develops engineering documentation to support a design effort, Participates in the development of technical writings.
- • Participate in reviews of highly complex specifications and other documentation to determine hardware engineering requirements.
- • Provide general guidance or training for lower level support staff, Provide technical support to manufacturing when needed
Education & Preferred Majors
- • Master degree
- • Electronics Science &Technology
Technology & Skills
- • Good oral and written English
- • Development Process Knowledge, tools, Production/Industrialization, Knowledge about customers, System knowledge, General technical knowledge
- • Problem solving strategies
- • Distributed Development (File sharing over locations, common library)
- • Global Cooperation / Intercultural competencies
121. LMP 生产物料计划员 （2人）
Department: Logistics 物流部
Location: Chang Chun
Responsibility
- • Undertaking material availability analyses, permanent maintenance of the parameters and master data as well as expediting purchase and supply sources, in order to guarantee timely availability of materials
- • Tracing the ordering and delivery processes of suppliers, in order if necessary to take corrective measures in good time and be able to provide suitable information, Working on introduction and phase-out project with order management, in order to ensure a timely introduction and phase-out of finished goods.
- • Monitoring of inventory levels and undertaking intelligent inventory management, in order to guarantee high supply levels with minimum inventories in a cost-effective way.
- • Dealing with transport damage, returns and replacement, drive for complicated issues with other departments, Operating an active supplier management scheme, in order to obtain the best performance from suppliers
- • Actively contributing to cooperation with all others involved and with interface partners and forwarding all relevant information, in order to keep themselves and others informed and create an optimum logistics chain.
- • Working on implementation of EDI and Web EDI requests in collaboration with EDI management of the IO, in order to actively shape the flow of information across the company.
Education & Preferred Majors
- • Master Degree
- • Logistics or Tech-Economics and Management / International trade Major
Technology & Skills
- • Good oral and written English, Good Math.
- • Professional expertise, Import & Export
- • Technical (Product) knowledge, Project management
- • Commercial knowledge, Knowledge of contract law
- • IT-tools and methods, Process knowledge, SAP system and MRP knowledge
- • Negotiation skills, Giving presentations/Chairing meetings, Project management
122. Quality Engineer质量工程师 （4人）
Department: PED电子驱动部
Location: Chang Chun
Responsibility
- • Moderation of milestone reviews and selected object reviews
- • Monitor Review inform, products, supporting doc's in order to verify that products are developing according to plan
- • Do random checks on selected work products that have to respect valid processes, methods and guidelines
- • Detect and Report weak points in the development process
- • Establish QA plan including negotiated QA targets
Education & Preferred Majors
- • Bachelor degree
- • Electronics Science &Technology Major
Technology & Skills
- • Good oral and written English, Good Math.
- • Problem solving techniques
- • Realize process lacks and create improvement proposals
- • Risk Management
123. Shift Leader 生产线班长 （3人）
Department: PED电子驱动部
Location: Chang Chun
Responsibility
- • Keep the assigned production line running and output in time according to production planning
- • Improve the productivity and machine utilization continuously
- • 5S management in assigned production line
- • Continuously improvement regarding quality requirement
- • Reduce the scrap rate therefore lower the additional cost
- • Staff dialog, motivate and coach employee，Safety production
Education & Preferred Majors
- • Bachelor degree
- • Electronics Science &Technology Major
Technology & Skills
- • Good oral and written English
- • Lean production, Electronics manufacturing, Mechanical assembly
- • SVPS, 5S management, Quality tools
- • SAP,MS office
124. Maintenance technician维修技师 （2人）
Department: PED电子驱动部
Location: Chang Chun
Responsibility
- • Troubleshooting for the assigned production equipment and tools, to ensure the running normally
- • Preventive maintenance for the assigned production equipment and tools
- • Improve the productivity and machine utilization continuously
- • 5S management in assigned production line
- • Continuously improvement regarding quality requirement
- • Safety production
Education & Preferred Majors
- • Bachelor degree
- • Mechanical Engineering / Automation Major
Technology & Skills
- • Good oral and written English
- • mechanism, electric and pneumatic control
- • SVPS, 5S management, Quality tools, Equipment troubleshooting
- • Lean production, Electronics manufacturing, Mechanical assembly
125. Shift Leader-injector 生产线班长-注射器 （1人）
Department: PGS C喷油器部
Location: Chang Chun
Responsibility
- • Keep the assigned production line running and output in time according to production planning
- • Improve the productivity and machine utilization continuously
- • 5S management in assigned production line
- • Continuously improvement regarding quality requirement
- • Reduce the scrap rate therefore lower the additional cost
- • Staff dialog, motivate and coach employee，Safety production
Education & Preferred Majors
- • Bachelor degree
- • Electronics Science &Technology Major
Technology & Skills
- • Good oral and written English
- • Lean production, Electronics manufacturing, Mechanical assembly
- • SVPS, 5S management, Quality tools
- • SAP,MS office
126. Product Engineer-FRA产品工程师-FRA （1人）
Department: PGS C喷油器部
Location: Chang Chun
Responsibility
- • Responsible for design, development and testing of fuel rail assemblies；Evaluate customer technical requirements and support business development activities.
- • Give direction to designers in the formulation of design concepts & development of production drawings；Ensure drawing/model details meet internal and customer requirements.
Ensure design tolerances/stack-ups meet manufacturing capabilities & product performance requirements.
- • Develop product documentation (BOM, FMEA, drawings, production test spec.’s, component test spec.’s, etc.)；Key technical support for cross-functional team (project manager, quality, manufacturing, purchasing，etc.).
- • Coordinate prototype builds, customer samples and DV Testing and support PV Testing；Support quality, operations and manufacturing engineering on design issues & material disposition.
- • Act as Component Project Manager；Support purchasing in supplier selection, PPAP approval, development, continuous improvement. Manage customer，supplier and internal design changes and evaluate supplier process changes.
- • Work with component suppliers in the development of optimized (cost, performance) designs. Provide engineering support for cost reduction activities.
Education & Preferred Majors
- • Bachelor degree
- • Mechanical Engineering / Automation Major
Technology & Skills
- • Good oral and written English
- • Mechanical knowledge; Material (especially in Metal, Fuel hose), Welding/Furnace brazing; resistant/ Arcwelding/after treatment knowledge, CAD software ability (Proe, UG, Catia), Geometric Dimension &Tolerance using;
- • Documentation description/control, Microsoft office, MS Project, Test Methods & tools (DV, PV), Product and Sales Strategy, Gasoline Engine&Fuel injection Knowledge, GS C component knowledge: Injector, Regulator, Damper; Fuel Rail Design Guideline, Vehicle technologies, Modelling method (Simulation/Prototyping)
- • Legal issues: Automotive legislation, Negotiation competency, Intercultural Skill/Knowledge, Customer Voice Table
- • Requirements Specification Review Method, Network to OEM, Improvement Methods, Innovation Methods
- • Knowledge sharing, Quality Management: DOE, PPAP, APQP, FMEA, SPC, Project Management
127. Project engineer项目工程师 （1人）
Department: PGS C喷油器部
Location: Chang Chun
Responsibility
- • Role: Project Leader for small projects, such as trading parts, small change management project；Drives and leads the project management activities according to the PM processes and related methods to achieve the defined goals.
- • Organize project milestone review, follow up open items. Milestone review reporting；Promise report maintains & report
- • Project actions list follow up to support project leaders；Samples order to supplier, delivering & shipment to customer
- • Validation test coordinator with supplier, by cooperated with PE, Application Engineer & PQE.
- • Other divisional/ locational reporting, such as Project Review, Green On Time, etc.
- • Change management & project list maintains and update
Education & Preferred Majors
- • Bachelor degree
- • Mechanical Engineering / Automation Major
Technology & Skills
- • Good oral and written English
- • Legal issues: Automotive legislation; Negotiation competency; Intercultural Skill; Customer Voice Table; Requirements Specification Review Method; Network to OEM;Legal issues: Contract right
- • Knowledge about Business Process; R&D controlling; Cost center controlling; Marketing
- • Improvement Methods; Innovation Methods; Knowledge sharing; Quality Management: PPAP, APQP, FMEA, 8D/5why/5steps
128. Team Assistant部门助理 （1人）
Department: PGS C 喷油器部
Location: Chang Chun
Responsibility
- • Interface with location for GS C, such as: medical insurance, office supply, company events, etc.
- • Provide assistance in daily working, such as: voucher management & approval, visitors' invitation letter, trip arrangement, correspondence, appointments, hotel reservations and logistic support, etc.
- • Drive and Lead 5s and 3i of GS C to be excellence.
- • Organize CMT meeting and action follow up
- • Other occasional task and function.
Education & Preferred Majors
Technology & Skills
- • Good oral and written English
- • product knowledge; SAP; business process; Finance knowledge; MS office; warehouse management; Documentation description/control
- • Project Management; Quality Management/ISO16949; Lean Manufacturing
- • Intercultural Skill/Knowledge; Team work
129. Team Assistant部门助理 （1人）
Department: PGS C 喷油器部
Location: Chang Chun
Responsibility
- • Interface with location for GS C, such as: medical insurance, office supply, company events, etc.
- • Provide assistance in daily working, such as: voucher management & approval, visitors' invitation letter, trip arrangement, correspondence, appointments, hotel reservations and logistic support, etc.
- • Drive and Lead 5s and 3i of GS C to be excellence.
- • Organize CMT meeting and action follow up
- • Other occasional task and function.
Education & Preferred Majors
Technology & Skills
- • Good oral and written English
- • product knowledge; SAP; business process; Finance knowledge; MS office; warehouse management; Documentation description/control
- • Project Management; Quality Management/ISO16949; Lean Manufacturing
- • Intercultural Skill/Knowledge; Team work
130. LQA生产线质量保证工程师 （1人）
Department: PSN传感器部
Location: Chang Chun
Responsibility
- • Line quality monitoring, system following, problem solving.
- • Optimizing manufacturing process to meet the quality and economy target , apply Siemens VDO production System (SVPS)
- • Controlling budget, reducing costs, personal evaluation and implementing top+ WIP , 3i activities
- • Co-operating with business development related activities
Education & Preferred Majors
- • Master degree
- • Electronics Science & Technology Major
Technology & Skills
- • Good oral and written English
- • Quality system in automotive parts manufacturing area ，Manufacturing and testing equipment
- • Quality tools - PFMEA, DOE, MCA, pPCA, 8D, POKE YOKE
- • Industry Engineering (lean production, 5S, 7 kinds of waste)，Electronics manufacturing method and technology
- • Financial knowledge, Logistic concept，Environment protection, Healthy, Safety of production
- • IT tools relevant for the tasks
131. Process Engineer工艺工程师 （1人）
Department: Production Equipment Department 生产设备部
Location: Chang Chun
Responsibility
- • Design and order tools, jigs, containers etc for production line.
- • Continuous improvement of production related facilities to optimize production line performance.
- • In charge of component preparation equipment.
Education & Preferred Majors
- • Bachelor degree
- • Machinery design or Automation Major
Technology & Skills
- • Good oral and written English
- • Electronics manufacturing method and technology
- • Quality tools - PFMEA, MCA, PPAP, 8D, SPC; Design of experiment
- • SVPS; Project management; Change management
- • IT tools relevant to the tasks, AutoCAD
- • Computer skills - MS Windows, Ms Office
132. Soldering Engineer焊接工程师 （1人）
Department: PT 工艺技术部
Location: Chang Chun
Responsibility
- • Troubleshooting of running products，New product trial run
- • Optimization of process parameters to continuously improve production line performance
- • Introduction of manufacturing equipment/tool and new process technology to production line.
- • Preparation of work instruction，Give training to production line.
- • Production program and software management.
Education & Preferred Majors
- • Bachelor degree
- • Electromechanics Major
Technology & Skills
- • Good oral and written English
- • Quality tools - PFMEA, MCA, PPAP, 8D, SPC; Design of experiment
- • SVPS; Project management;
- • Change management, Electronics manufacturing method and technology
- • IT tools relevant to the tasks, AutoCAD
- • Computer skills - MS Windows, Ms Office
133. AOI Engineer AOI工程师 （2人）
Department: PT 工艺技术部
Location: Chang Chun
Responsibility
- • Introduction of AOI program for new project; Issue and update work instruction.
- • Give training to production line.
- • Optimization of AOI process to continuously improve escape rate and false call.
- • Troubleshooting of running products.
- • Introduction of manufacturing equipment/tool and new process technology to production line.
- • Implementation of ECN; Production program and software management. Sample management.
Education & Preferred Majors
- • Bachelor degree
- • Electronics Science &Technology or Electromechanics Major
Technology & Skills
- • Good oral and written English
- • Electronics manufacturing method and technology
- • Quality tools - PFMEA, MCA, PPAP, 8D, SPC; Design of experiment
- • SVPS; Project management;
- • IT tools relevant to the tasks, AutoCAD
- • Computer skills - MS Windows, Ms Office
134. SMT Engineer工艺工程师 （1人）
Department: PT 工艺技术部
Location: Chang Chun
Responsibility
- • Troubleshooting of running products，New product trial run
- • Optimization of process parameters to continuously improve production line performance
- • Introduction of manufacturing equipment/tool and new process technology to production line
- • Preparation of work instruction，Give training to production line
- • Production program and software management
- • Issue and update work instruction，Give training to production line
Education & Preferred Majors
- • Bachelor degree
- • Electronics Science &Technology or Electromechanics Major
Technology & Skills
- • Good oral and written English
- • Electronics manufacturing method and technology
- • Quality tools - PFMEA, MCA, PPAP, 8D, SPC; Design of experiment
- • SVPS; Project management; Change management
- • IT tools relevant to the tasks, AutoCAD
- • Computer skills - MS Windows, Ms Office
135. Maintenance Engineer维修工程师 （2人）
Department: PT 工艺技术部
Location: Chang Chun
Responsibility
- • Continuously improve equipment status
- • Reduce the machine down time
- • Equipment Calibration, Heavy Repair
- • Optimize the pre-maintenance, promote the implementation of TPM
- • Spare parts management，Control the cost of spare parts
Education & Preferred Majors
- • Bachelor degree
- • Electronics Science &Technology or Electromechanics Major
Technology & Skills
- • Good oral and written English
- • Mechanical Engineering
- • Pneumatic / Electrical drive
- • TPM，6σ and others analysis tools
- • IT tools relevant to the tasks, AutoCAD
- • Computer skills
136. WHSE SAP input 仓库SAP系统录入员 （1人）
Department: PT 工艺技术部
Location: Chang Chun
Education & Preferred Majors
- • Logistics or computer science
Technology & Skills
137. SAP Engineer （1人）
Department: IO 信息管理部
Location: Chang Chun
Responsibility
- • SAP system administration (system connectivity, stability, update, monitor, etc)
- • SAP user authorization administration; SAP user support; SAP user training
- • SAP programming; Material master data maintenance; related software administration like MODIAS, MDS, PDM, etc.
- • IO Help desk; 5S, ISO14000; Document Admin
Education & Preferred Majors
- • Master Degree
- • Computer science and technology Major
Technology & Skills
- • Good oral and written English
- • SAP basis knowledge; Database; Network
- • Manufacturing process; Quality/ Logistics/ Finance/ Manufacturing/ HR
- • Co-ordination and communication; Customer service
- • e-business; ABAP
138. MES engineer MES工程师 （1人）
Department: IO 信息管理部
Location: Chang Chun
Responsibility
- • Server and clients' management, Traceability projects.
- • Co-ordination with SVCC departments,SV IO, Consignment warehouse system
- • Coach new employee, Temporary work
- • Develop programs to meet the requirement from the other
Education & Preferred Majors
- • Master Degree
- • Computer science and technology Major
Technology & Skills
- • Good oral and written English
- • Unix, Linux, Oracle,SQL, Enterprise workflow
- • Manufacturing process, Quality, Logistics
- • Customer service, Co-ordination and communication
- • Programming
139. Accountant会计 （3人）
Department: F&A 财务部
Location: Chang Chun
Responsibility
- • Record properly all accounting transactions affecting the company’s operations in compliance with legal and management requirement.
- • Maintain adequate records relative to AR, AP, transfer items, assets, inventory, cost, income & expenses and finance
- • Properly archive all transactions’ evidence，Manage bank accounts and fixed deposits
- • Physical fixed assets stocktaking, inventory stocktaking，Coach new employee
- • All kinds of taxation reporting，Billing to customer，Occasional task or function
Education & Preferred Majors
- • Master Degree
- • CGA/ CPA Major
Technology & Skills
- • Good oral and written English
- • Knowledge on PRC accounting guide-line，Knowledge on accounting law and tax law.
- • Related Economical law e.g. contract law, corporation law，US GAAP accounting knowledge
- • Auditing knowledge，Familiar with finance & accounting computer applications
- • Computer ( MS office )，ERP System
140. Accountant会计 （1人）
Department: F&A 财务部
Location: Chang Chun
Responsibility
- • Record properly all accounting transactions affecting the company’s operations in compliance with legal and management requirement.
- • Maintain adequate records relative to AR, AP, transfer items, assets, inventory, cost, income & expenses and finance
- • Properly archive all transactions’ evidence，Manage bank accounts and fixed deposits
- • Physical fixed assets stocktaking, inventory stocktaking，Coach new employee
- • All kinds of taxation reporting，Billing to customer，Occasional task or function
Education & Preferred Majors
- • Bachelor Degree
- • Accounting Major Major
Technology & Skills
- • Good oral and written English
- • Knowledge on PRC accounting guide-line，Knowledge on accounting law and tax law.
- • Related Economical law e.g. contract law, corporation law，US GAAP accounting knowledge
- • Auditing knowledge，Familiar with finance & accounting computer applications
- • Computer ( MS office )，ERP System
141. BA 商务管理 （2人）
Department: F&A 财务部
Location: Chang Chun
Responsibility
- • Assist Business Administration Group Manager in Annually forecast, budget and strategic planning
- • Product calculation, quotation，Assist Business Administration Group Manager in Excess cost calculation and claim
- • Assist Business Administration Group Manager in Budget controlling，Division communication
- • Division related reporting，Assist Business Administration Group Manager in Financial analysis on division level
- • Occasional task or function
Education & Preferred Majors
- • Bachelor/Master Degree
- • Computer science and technology Major
Technology & Skills
- • Good oral and written English
- • Knowledge on PRC accounting guide-line，Knowledge on accounting law and tax law.
- • Related to Economical law e.g. contact law, cooperation law.
- • US GAAP accounting knowledge，Siemens organization and division business relation
- • Production, Logistic, Purchasing, Quality and Personnel Adm, Product knowledge
- • Computer (MS office) skill, Analysis skills
西门子威迪欧汽车电子（惠州）有限公司
401. Mechanic Engineer 机械工程师 （15人）
Department: R&D 研发部
Location: Hui Zhou
Responsibility
- • To design mechanic parts of products following the project schedule, including follow up tooling
Education & Preferred Majors
- • Bachelor or Master degree, mechanic related major
Technology & Skills
- • Be familiar with PRO/E，AUTOCAD
- • Be familiar with plastic, metal materials designing and tooling
- • Good English skills
- • With factual designing experiences is preferred
402. GPS Navigation Software Engineer GPS 导航软件工程师 （15人）
Department: R&D 研发部
Location: Hui Zhou
Responsibility
- • To design software of GPS navigation products
Education & Preferred Majors
- • Bachelor or Master degree, software related major
Technology & Skills
- • Be familiar SCM, C++
- • Gook speaking and listening in English
- • R&D experiences in WIN CE platform or SCM is preferred
- • With GPS product experiences is preferred
403. Data Map Engineer 地图数据库处理工程师 （15人）
Department: R&D 研发部
Location: Hui Zhou
Responsibility
- • To development data maps of navigation system
Education & Preferred Majors
- • GIS related major, bachelor or master
Technology & Skills
- • Be familiar with GIS and data base
- • Be familiar with software engineer
- • Good English skills in listening and listening
- • With data-map experiences is preferred
404. Car-audio Software Engineer 车载音响软件工程师 （20人）
Department: R&D 研发部
Location: Hui Zhou
Responsibility
- • To design software of car-audio products
Education & Preferred Majors
- • Bachelor or Master, software related major
Technology & Skills
- • Be familiar with C language
- • Good English speaking and listening skills
405. Software Testing Engineer 软件测试工程师（7人）
Department: R&D 研发部
Location: Hui Zhou
Responsibility
- • Perform software test for automotive products
Education & Preferred Majors
- • Bachelor or Master, software related major
Technology & Skills
- • Be familiar with computer languages
- • Be aware of and interesting in software testing
- • Good English speaking and listening skills
406. Electronics Engineer 电子工程师 （13人）
Department: R&D 研发部
Location: Hui Zhou
Responsibility
- • Perform PCB layout of automotive products (Car-audio, HVAC, GPS Navigation)
Education & Preferred Majors
- • Bachelor or Master, electronics related major
Technology & Skills
- • Be familiar with electronics and PCB layout design
- • English skills Over CET-4
407. Testing Engineer 测试工程师（8人）
Department: Production Engineering 产品工程部
Location: Hui Zhou
Responsibility
- • Perform Automatic testing system
- • Testing program design and equipment maintenance
- • Technique supporting at production scene
Education & Preferred Majors
- • Automation or software related major, bachelor or master
Technology & Skills
- • Be familiar with an interesting in testing engineer
- • General software design ability
- • Good English communicating skills
- • With Labview experiences is preferred
